beautypg.com

Optima and minima series receivers, Optima and minima receivers, Optim a 7 – HITEC Flash 7 User Manual

Page 16: Optim a 9 minim a 6e & mini m a 6t, Optim a 6 & opti m a 6 lite, Minim a 6s minim a 6l, 7 channel 2.4 ghz aircraft computer radio system, Minima 6s minima 6l minima 6s & minima 6t, Optima 7 optima 9 optima 6 & optima 6 lite

background image

7 Channel 2.4 GHz Aircraft Computer Radio System

7 Channel 2.4 GHz Aircraft Computer Radio System

Section 1: Introduction

15

OPTIM A 7

6

OPTIM A 9

MINIM A 6E & MINI

M A 6T

(6T output block is on top)

6

OPTIM A 6 & OPTI

M A 6 LITE

6L utilizes a soft case and 

exposed output block

2.4G

Hz 6 Channel

Ai

rcr

aft

Re

cei

ver

CH1

CH1

CH1

CH1

CH1

CH6/

BAT

6

MINIM A 6S

MINIM A 6L

Optima and Minima Series Receivers

1. Function Button: Used for binding the receiver to a module or Hitec 2.4 built-in transmitters, entering
the FAIL-SAFE or Hold feature.
2. Dual LED: Status Indicator: Indicates the set-up process codes and current status of the receiver.
3. Channel Output and Battery Input Ports: The ports for battery power input and servos, gyros and
other accessories’ output ports are located at the side.
4. SPC (Supplementary Power Connection)*: Power the Optima and Minima receivers function with up
to a 35V. electric aircraft motor battery.
5. Telemetry Sensor and Data Port*: A three pin servo plug connector port is featured on the Optima 7
and Optima 9 (Optima 6 is not applicable.) Using the HPP-22 PC interface accessory, this port serves to
facilitate upgrading the device’ s software and interfacing the optional onboard sensor station.
6. BODA (Boosted Omni Directional Antenna) System*: Hitec’s exclusive 2.4GHz BODA System will show
you another way of using our 2.4GHz systems. The single Omni-directional antenna booster makes it
much easier to install the 2.4GHz antenna. Intensive tests have proven that the single BODA system
in our 6 & 7 channel systems is better than or equal to our competitor’s dual antenna systems while
our Optima 9 receiver features a dual BODA system to give the added security that larger models need.
Installation is easy and simple, insert the antenna into the supported antenna holder and stick it to the
desired spot you wish to install.

The following information contains the complete directions on how to use the Optima and Minima series
receivers (version 3.00(0). We encourage you to review this information before using these products.

MINIMA 6S

MINIMA 6L

MINIMA 6S & MINIMA 6T

(6T output block is on top)

OPTIMA 7

OPTIMA 9

OPTIMA 6 & OPTIMA 6 LITE

(6L utilizes a soft case and exposed output block)

6

6

6