HITEC Flash 7 - Manual (Page 33)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
32
The model type screen defines the features of the active model. These are the features we told the radio
our model had during the “create a new model” process plus all the default features. Here we can define
all the choices you have while setting up your aircraft in the Flash 7.
There are three types of aircraft “Model Type” menus:
Model Type Menu
1. From the System Menu select MDL TYPE.
2. Press the jog dial once to enter the Model Type Selection
Menu. ACRO is the first and default selection.
Model Type ACRO Menu Programming
3. Press the jog dial again to enter the ACRO setup menu.
4. Once in the ACRO setup menu you will set your wing and tail
choices. Scroll to the wing selection and press the jog dial to
activate the selections and scroll through the choices.
The choices for Normal ACRO wing type are:
1AILE – Single aileron servo
1AILE+1FLAP – Single aileron servo and single flap
servo
1AILE+2FLAP - Single aileron servo channel and two
flap servos
2AILE – Two aileron servos
2AILE+1FLAP - Two aileron servos and one flap servo
2AIL+2FLAP - Two aileron servos and two flap servos
ACRO: For all fixed wing, glow, gas and some electric powered models.
GLID: For all gliders and some electric powered models.
HELI: All Helicopters will use the HELI menu.