HITEC Flash 7 - Manual (Page 22)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 1: Introduction 21
Range Check Function
It is critical that before each flight session you perform a range check that confirms the signal between
the receiver and transmitter is appropriate. To do a range check, use a power-down mode to reduce the
transmitter signal strength. During this power-down mode, you should walk away from the secured
aircraft carrying the transmitter to a distance of approx. 30 meters, to test the effective range.
2. Press the jog dial and back button simultaneously to enter the
System Menu list. From here, scroll to the SPECTRA function
and press the jog dial to enter the Spectra setup menu.
3. Scroll to the RANGE CHECK and push the jog dial to enter the
range check function.
4. If you are sure you want to proceed with the range check,
select “Yes” and press the jog dial to continue.
5. Walk away from the secured aircraft carrying the transmitter
to a distance of approx. 30 meters, to test the effective range.
Once you have completed the range check, push the jog dial
to end the range check.
1. Turn on the transmitter and select “Yes” from the “Ready to
Transmit” prompt by pressing the jog dial.