HITEC Flash 7 - Manual (Page 88)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
87
Revolution Mixing cont.
5. Scroll to highlight the “L/U” (left/up) field and press the jog
dial to activate the menu.
6. Rotate the jog dial to set the position for the tail rotor pitch
servo when the throttle stick is full down. Press the jog dial to
confirm your input.
4. Scroll to the “RATE” field and press the jog button to activate
the menu.
9. Scroll to highlight the “EXP” field and press the jog dial to
activate the menu.
10. Rotate the jog dial to increase (clockwise) or decrease
(counter-clockwise) the desired exponential value for this
mix. This value does not affect exponential throw of the
servo with rudder stick commands. Press the jog dial to
confirm your input.
7. Scroll to highlight the “R/D” (right/down) field and press the
jog dial to activate the menu.
8. Rotate the jog dial to set the position for the tail rotor pitch
servo when the throttle stick is full up. Press the jog dial to
confirm your input.
11. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
12. Scroll to select a switch to activate the camber mix. Press the jog dial to confirm your selection.
a. If you choose the “NULL” option, revolution mix will remain active at all times for this model.
b. If you choose a switch:
- The switch position menu will appear. Scroll to highlight the
switch position that you will use to enable revolution mix.
Press the jog dial to confirm your selection.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the
top right corner of the screen will indicate when the mix is
active.