HITEC Flash 7 - Manual (Page 52)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 4: Common Model Programming Menu
51
Programmable Mixes cont.
20. Press the jog dial again to enable selections in the S/W menu.
21. Scroll to select the switch that you will use to activate the
mix and press the jog dial to confirm your selection. If “NULL”
is selected, the mix will always be active.
22. If you selected a switch, the switch position menu will
appear. Scroll to highlight the switch position(s) that you
will use to enable the mix. Press the jog dial to confirm your
selection.
25. To inhibit this mix, scroll to the “MIX” field and press the jog
dial to activate the menu.
26. Scroll to select “INH” and press the jog dial to confirm your
selection.
27. Press the back button twice to return to the model function
menu.
The Flash 7 features two customizable timers that can be triggered by switches or the throttle position.
Downward counting timers can be helpful in making sure that you land before running out of fuel or
battery power. You could also use an upward counting timer to measure the duration of your glider
flights. In addition, there is an integrated timer for each model memory that automatically records the
length of time that the Flash 7 is used for that model. All timers are displayed on the home screen.
23. Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the
top right corner of the screen will indicate if the mix is on or
off.
24. Press the back button to return to the programmable mix
sub-menu.
Timers
To configure a timer:
1. From the model menu, scroll to highlight “TIMER” and press
the jog dial once to enter the timer menu.
You can also enter the timer menu directly from the home screen. Scroll to highlight a timer on
the screen and press the jog dial.
Note
Tip Tip
Tip