HITEC Flash 7 - Manual (Page 58)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 5: Acro and Glider Programming Menu
57
Working with the Acro/Glid Model Function Menu
1. Turn on transmitter. When prompted to transmit, select “NO”.
2. Verify that the active model is an ACRO or GLID model type.
3. To access the model function menu, press and hold the jog dial.
4. The menu options shown reflect the parameters defined for the active model in the model type menu
(Model Type, Wing and Tail). ACRO and GLID-specific items are integrated in the menu with the options
that are common to all model types.
Flight Conditions
The Flash 7 allows you to program up to four flight conditions. This powerful feature lets you define
customized trim values and mix settings for different phases of flight.
The flight conditions for fixed wing aircraft are:
ACRO
GLID
1. Normal 1. Normal
2. COND-2 2. Speed
3. COND-3 3. Thermal
4. COND-4 4. Launch
The following features support flight condition programming in ACRO or GLID mode:
Aileron > Rudder Mix
Elevator > Camber Mix
Camber Mix (GLID only)
Gyro
1. From the model menu, rotate the jog dial to highlight
“F.COND” and press the jog dial once to enter the flight
conditions menu.
2. Scroll to the flight condition to be configured and press the
jog dial to confirm your selection.
3. Press the jog dial again to activate the switch selection menu
(not applicable in “Normal” flight condition).
4. Scroll to select the switch that you will use to activate this flight condition and press the jog dial to
confirm your selection.
a. If “NULL” is selected, the flight condition will be inactive.
b. If you selected a switch, the switch position menu will appear.
- Scroll to highlight the switch position that you will use to
enable the flight condition. Press the jog dial to confirm your
selection.
- Scroll to select the “ON” position and press the jog dial to
confirm your selection. If you toggle the selected switch, the
field in the top right corner of the screen will indicate which
flight condition is active.