HITEC Flash 7 - Manual (Page 90)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
89
Swash to Throttle Mixing cont.
6. Scroll to the top row of the value table (“AILE”) and press the
jog dial to activate the menu.
4. Scroll to the function field (“AILE” or “ELEV”). If “AILE” is not
the current function, press the jog dial to activate the menu.
Otherwise, skip to step 6.
5. Scroll to select “AILE” and press the jog dial to confirm your
selection.
9. Scroll to highlight the “R/D” (right/down) field and press the
jog dial to activate the menu.
10. Rotate the jog dial to to input the desired throttle
compensation when a right roll command is given.
7. Scroll to highlight the “L/U” (left/up) field and press the jog
dial to activate the menu.
8. Rotate the jog dial to input the desired throttle compensation
when a left roll command is given. Press the jog dial to confirm
your input.
11. Scroll to highlight the “EXP” field and press the jog dial to
activate the selection.
12. Rotate the jog dial to input the desired exponential travel of
the throttle servos when reacting to this mix. The setting
does not affect exponential travel of the servo when throttle
stick inputs are given.
13. Scroll to the function field and press the jog dial to activate
the menu. Otherwise, skip to step 17.
14. Scroll to select “ELEV” and press the jog dial to confirm your
selection.
15. Repeat steps 6-12 to input throttle compensation values for
elevator inputs.
16. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.