HITEC Flash 7 - Manual (Page 26)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides
25
Airplane Quick Start Guide cont.
6. When asked to create a new model select “Yes.” This will bring
up the Model Type screen.
Scroll to “Acro/Glid” or “Select Acro/Glid.”
Now scroll to “wing” and press the jog dial to activate the
choices. If you have 1 aileron servo, select 1AILE. If your plane
has two aileron servos, select 2AILE. Press the jog dial once to
confirm your selection.
7. Next, select your plane’s tail type. Select “Normal” and press
the jog dial once to confirm your entry .
8. Now press the back button once. You will be prompted to
choose the receiver type. Press the jog dial once to activate
the receiver selections and scroll to the receiver you have in
your aircraft. Press the jog dial once to confirm your receiver
selection.
We are programming a new model into the model memory slot number two, not the model
memory slot one. For the purpose of this exercise it will ensure a fresh model memory with no
existing programming.
Note
Tip Tip
Tip
Depending on what you select here, and for the following menu choices, the radio will
automatically optimize the functions for your choices. In other words, if you select a wing type
without flaps, there will be no flap function control in that model memory’s programming
selection.
Note
Tip Tip
Tip