HITEC Flash 7 - Manual (Page 94)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
93
Throttle Curve cont.
11. Press the back button to return to the model function menu.
To disable the throttle curve:
1. Scroll to highlight the “MIX” field in the throttle curve menu
and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the Back button to return to the model function menu.
- Scroll to the flight condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial to
confirm your selection.
You may also select a flight condition in this menu by activating the desired flight condition.
Note
Tip Tip
Tip Caution
Pitch Curve
The Pitch Curve function allows you to modify the normally-linear servo rate movement for collective
pitch by defining five different points along the pitch response curve. It is necessary to manipulate
the pitch curve in conjunction with the throttle curve to achieve maximum performance from your
helicopter.
To configure a pitch curve:
1. From the model menu, rotate the jog dial to highlight
“P.Curve” and press the jog dial once to enter the activation
menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the pitch curve
menu.
4. Scroll to the “1” field and press the jog button to activate the
menu.