HITEC Flash 7 - Manual (Page 40)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
39
Sensor
When used with the Optima series of telemetry capable receivers, the
Flash 7 has the ability to communicate a variety of information from
the airplane directly to the transmitter. Refer to Section Seven Using
the Telemetry System on page 96 for more information.
Spectra
The spectra menu is utilized to manage the interface between the Flash 7 transmitter and the receiver for
each aircraft. This includes specifying the receiver type, performing a range check, binding the receiver,
and specifying a frequency scan. All of these functions are covered in Section One: Introduction - Hitec
2.4GHz System. Please refer to page 14 for complete information on the spectra menu.
Trainer Function cont.
9. To select which switch will be used for the trainer function
scroll down to the S/W field and press the jog dial to enter the
switch selection menu. Press the jog dial again to activate the
switch selections.
10. Scroll to select a switch to activate the trainer function. Press
the jog dial to confirm your selection.
- If you choose the “NULL” option, the Trainer function will
remain inactive at all times for this model.
- If you choose a switch:
- The switch position menu will appear. Scroll to
highlight the switch position that you will use to
enable the mix. Press the jog dial to confirm your
selection.
- Scroll to select “ON” and press the jog dial to confirm
your selection. If you toggle the selected switch, the
field in the top right corner of the screen will indicate
when the mix is active.
11. Press the back button twice to return to the trainer menu.
To disable the trainer function:
1. Scroll to highlight the “MIX” field in the trainer menu and press
the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the back button to return to the system menu.