Echelon LonPoint Module - Manual (Page 53)

LonPoint Hardware Guide 4-17
LonPoint Type 2 Base Plate Installation
All LonPoint LPR Routers may be installed in either a Type 2 Base Plate (Model
40222) or a Type 2D DIN Base Plate (Model 48222). Figure 4.16 presents a detailed
view of the front side of the Base Plate. The circuit board inside the Type 2 Base
Plate includes a large number “2” in the lower right corner, as viewed from the front
of the base plate, designating it as a Type 2 Base Plate. Test points are provided on
the circuit board for measuring all of the wiring connections; symbols are silk-
screened on the PCB to identify the functions of the test points.