Echelon LonPoint Module - Manual (Page 106)

11-2 Installing the LPR Router
Modules
LonPoint LPR Router Modules
There are six models of the LPR Router Module, all of which share a common front
panel (figure 11.1). The models include:
42100 LPR-10 TP/FT-10 to TP/FT-10 module
42101 LPR-11 TP/FT-10 to TP/XF-78 router module
42102 LPR-12 TP/FT-10 to TP/XF-1250 router module
42103 LPR-13 TP/XF-78 to TP/XF-78 router module
42104 LPR-14 TP/XF-78 to TP/XF-1250 router module
42105 LPR-15 TP/XF-1250 to TP/XF-1250 router module
The front panel label identifies the model number and which transceiver type is
associated with which channel. The front panel indicator LEDs are shown in figure
10.1; there are no user-configured jumper blocks or other adjustable controls on the
LPR Routers. The front panel includes two network access jacks, one for each
channel.
If using an LPR-11, -12, -13, -14, or -15 Router, be certain to use a PCC-10 PC Card
together with a PCC-10 TP-78 or TP-1250 Pod, as required, for connecting to the
TP/XF-78 or TP/XF-1250 channel network access jack. The PCC-10 PC Card
includes a transceiver that will communicate only on the TP/FT-10 channel; a pod
(adapter) must be connected to the PCC-10 to allow it to be used on a TP/XF-78 or
TP/XF-1250 channel. Use Model 73250 pod for a TP/XF-78 channel and Model
73251 pod for a TP/XF-1250 channel. Pods will require the addition of a 3.5mm
monaural phone plug (LZR HP147 or equal).