Echelon LonPoint Module - Manual (Page 13)

LonPoint Hardware Guide 2-3
The LonPoint Interface Modules share a common form factor that includes a front panel
assembly to which a printed circuit board (PCB) with active electronics is connected.
The front panel of all of the modules includes a service switch and service LED, a
combination power/wink LED, and a network connector (figure 2.1).}
Lo
nP
oi
nt
™
In
te
rfa
ce
1
2
3
4
DI-10 MODEL 41100 ID NUMBER
DI-10 MODEL 41100 ID NUMBER
DI-10
MODEL 41100 972
SW VERSION 1.0
ID NUMBER
INPUT: 0-32VDC LISTED 178K
ENERGY MANAGEMENT
EQUIPMENT SUBASSEMBLY
c us
m
L
U
®
E
Figure 2.1 LonPoint Interface Module - Typical Front Panel
The rear of the PCB assembly includes a polarized, shrouded, 14-pin interface connector
that connects to a mating socket in a Type 1 Base Plate or Type 1D DIN Base Plate. Any
user-configured jumpers are also located on the rear of the PCB assembly (figure 2.2).