AMT Datasouth Documax A6300 - Manual (Page 88)

MENU 4: PRINTER CONTROL
Printer Displays Values Description
Auto LF xxx Disable
Enable
No line feed with carriage return
Performs a line feed with carriage return
Auto CR xxx Disable
Enable
No carriage return with line feed
Performs a carriage return with line feed
Wrap xxx Disable
Enable
Printable data past the right margin is ignored.
Performs a carriage return line feed if data exceeds the right
margin
Print
xxxxxxxx
Bidirect
Unidirect
Bi-Directional printing
Unidirectional printing Prints left-to-right only
Auto Path SW xx ON
OFF
When this feature is set to `ON' and a paper out occurs while
printing, the printer will automatically change to the other
paper path and continue printing if the forms are loaded
successfully. Path feature must be set to ‘Either’
This feature is valid only on dual tractor units.
Vert Graphic xxx ON
OFF
Specifies status of the TI-885 raster graphics mode, if
installed.
When ON Anadex graphics is enabled when DS-180
Emulation is selected.
Horz Graphic xxx ON
OFF
Specifies status of the TI-885 horizontal graphics mode, if
installed.
Power Up xxxxxxx On Line
Off Line
Specifies whether printer powers up into on line or off line
status
Buffer Size xxxx 512
.
.
.
.
Max
Specifies the size of the data buffer.
Lower limit of this range may be limited by "Window Size"
feature.
Depends on buffer option installed