AMT Datasouth Documax A6300 - Manual (Page 76)

4.5 Profile Feature Listing
To print a listing of the feature settings of a particular profile, follow the steps below.
1. Make certain 20 column or wider paper is loaded in the printer.
2. Press the On/Off Line key to take the printer off line.
3. Before entering Setup Mode, press the Profile key until it displays the profile you
wish to print.
4. Open the Keypad Door and use the Next Menu key to go to Menu 9. The display
will read:
5. Press the Feature  key until display reads:
6. Press the Enter key. The printer will print a listing of the profile feature settings.
7. Close the Keypad Door to exit Setup Mode after printout is complete.
8. Press the On/Off Line key to return to normal operation.
4-6
4.6 Changing Features In A Profile
M9 DIAGNOSTICS
Print Profile