AMT Datasouth Documax A6300 - Manual (Page 125)

4. Press the Next Menu key until you have accessed Menu 6. The display will appear
as shown.
5. Press the Feature  key to select the Parallel feature.
6. Press the Value  key to select enable/disable.
7. Press the Enter key to accept your selection.
There are three additional features which allow you to configure the parallel
interface to suit your needs: Handshake, [BUSY, ACK], [ACK, BUSY,
BEFORE, AFTER], and [8th Bit ENABLE, DISABLE]. All three features are
contained in Menu 6, Parallel Control. Each feature is explained in detail in
Chapter 4. After you finish your parallel interface configuration, continue with
step 8.
8. Close the Keypad Door to exit Setup Mode. The alternating message will be
displayed.
9. Press the Profile key to save the setting in non-volatile memory.
10. Press the On/Off Line key to place the printer back on line.
B-5
B.3 RS-232 Serial Interface

Data Transfer Rates (Baud Rate):
110 2400
300 4800
600 9600
1200 19200
1800

Synchronization:
M6 PARALLEL CONTROL
Press `Profile'
To Save Settings