AMT Datasouth Documax A6300 - Manual (Page 64)

When the printer runs out of paper, the following messages will appear in the display depending on paper
path selected:
or
1. Remove last printed form from the printer.
2. Load continuous forms. Refer to page 3-1.
3. Press the On/Off Line key to go back on line.
The alternating display indicates which path (Main, Alt) is empty and which form to
reload.
3-23
3.12 Automatically Changing Paper Paths On Paper Out
< Paper Out Main >
Load Checks
< Paper Out Alt >
Load Profile 2
NOTE
If the Profile has not been renamed to
match the form being used, the display
will indicate `Load Profile x' as shown in
the example above. In this case, the form
associated with Profile 2 should be
loaded. For more information on naming
Profiles, see the `Rename' feature located
in the Profile Control Menu described in
Chapter 4.