AMT Datasouth Documax A6300 - Manual (Page 104)

Keypad Lockout
The following message is displayed momentarily after pressing a key which has been
locked out or delayed.
This feature can be changed by using the instructions located in Appendix D.
Cover Open
The following message is displayed on the keypad whenever the cover is open:
To resume normal operation, close the cover. The following message is displayed
whenever the cover is closed:
Pressing the Profile (Y) in response to this message will cause the printer to reset the
Ribbon Usage feature to 0%, indicating a new ribbon was installed. Pressing the On/Off
Line key (N) will resume normal operation without affecting the ribbon usage value.
However, if the ribbon is at 100% usage, it must be replaced before printing may continue.
5-7
<< Key Locked >>
Ribbon Replaced?
< Cover Open >
Y=Profile N=Onln