AMT Datasouth Documax A6300 - Manual (Page 38)

Adjust  Press this key to move the form upward 1/144 inch for precise form
alignment. When the key is pressed for more than 1/2 second, the
paper advances continuously until the key is released.
Adjust  Press this key to move the form downward 1/144 inch for precise form
alignment. When the key is pressed for more than 1/2 second, the
paper reverse feeds continuously until the key is released.
Tear Off Press this key to advance forms up to the tear bar so that the last
printed form can easily be removed. Press the key a second time to
move the form back into print position. Paper motion is determined by
the value of the Manual Tear feature (see M2 Manual Tear).
To change the tear off position, press the Tear Off key, press Adjust 
or  , then press the Tear Off key again. The new distance is
automatically saved in the current profile.
Line Feed Press this key once to advance the paper by one line. When the key is
pressed for more than 1/2 second, continuous line feeds are performed
until the key is released.
Profile This key allows you to select one of ten user-defined profiles. To use
this key, place the printer off line. Then press the Profile key.
Available profile names are shown in the display window each time the
Profile key is pressed. This key can be used only when the printer is off
line. For more information about profiles, see Chapter 4.
After changing profiles, the printer attempts to park and reload the
paper to reset top of form. The printer will automatically change paper
paths or request a form be loaded depending on the Path feature
setting. See Section 3.12 for details on selecting paper paths using the
Profile key.
2-4