AMT Datasouth Documax A6300 - Manual (Page 144)

Open top access cover to replace the ribbon cartridge. At this point the message
on the keypad display will change to:
When the top access cover is closed the keypad display will change to:
This message will be displayed whenever the top access cover is opened and then
closed.
Pressing the Profile key (Y) in response to this message will cause the printer to
reset the ribbon usage feature to 0%, reset the, carriage, and resume operation.
Pressing the On Line key (N) in response to this message will cause the printer to
reset the carriage and resume operation without effecting the ribbon usage value.
However, if the ribbon is at 100% usage, it must be replaced before printing may
continue.
2. Enter Setup mode and manually change the value of the ribbon usage feature to
some value less than 100%. For additional information on setting features, refer to
Chapter 4 Features and Profiles in the User's Manual.
E-3
Appendix F..............................ASCII Conversion Chart
ASCII
CHR
DECIMAL
VALUE
HEX
VALUE
ASCII
CHR
DECIMAL
VALUE
HEX
VALUE
NUL 0 00 ESC 27 1B
SOH 1 01 FS 28 1C
STX 2 02 GS 29 1D
ETX 3 03 RS 30 1E
EOT 4 04 US 31 1F
ENQ 5 05 SP 32 20
ACK 6 06 ! 33 21
BEL 7 07 ” 34 22
BS 8 08 # 35 23
HT 9 09 $ 36 24
Cover Open
Ribbon Replaced?
Y = Profile N = Onln