AMT Datasouth Documax A6300 - Manual (Page 29)

1.8 Printer Self Test
This test is used to verify printer operation. Before performing the printer self-test, refer
to Section 3.3 Load Forms page 3-3 for instructions on loading paper in the printer.
To start the test:
1. Load 8.5" forms.
2. Open the Keypad Door.
3. Press the Feature  key once. The LCD will Show "Run Self Test".
4. Press the Enter key. The Printer self test will start (Figure 1-12). The display will
alternate between the following:
5. The self test may be stopped by pressing the Enter key or by closing the Keypad
Door.
1-18
CAUTION
MARGINS ARE SET FOR 8.5"
(OR 80 COLUMN) PAPER.
PRINTING OFF OF FORM WILL
LEAD TO PRINTER DAMAGE.
`Enter' To Stop
< Diagnostics >