AMT Datasouth Documax A6300 - Manual (Page 66)

Each Profile contains a `Path' feature which specifies the (Main, Alt, Either) paper path.
When a profile is selected, the paper path may be automatically changed or the operator
may be asked to load a new form in the currently selected paper path. The action taken
depends on the value of the `Path' feature setting (located in Menu 2 Forms Control).
After using the Profile key to select a new profile, the operator should either press the
On/Off Line key or the Load key if paper is not loaded. The printer will then park the
current form. If the current form cannot be parked, the printer will advance the form to
the tear bar and display:
After tearing off the current form and pressing On/Off Line, the printer will then park that
form.
Example of profile names and paths:
Original Profile Name New Profile Name Path
Profile1 Checks Main
Profile2 Invoice Alternate
Profile3 Memos Alternate
Profile4 Reports Alternate
Example using same path:
The current profile is named "Invoice" and the paper path selected by that profile is
alternate. The new profile named "Memos" specifies the same path (Alt). After selecting
profile "Memos" and the printer has successfully parked the invoices, the following
message will be displayed.
After placing memos into the alternate path, press the Load key. The printer will load the
memos and resume normal operation.
3-25
Example using different path:
The current profile is named "Invoice" and the paper path selected by that profile is
alternate. The new profile named "Checks" specifies the main paper path. After selecting
profile "Checks" and the printer has successfully parked the invoices, the printer will load
< Tear Off Form >
< Press On/Offline >
Load Memos
< Paper Out: Alt >