AMT Datasouth Documax A6300 - Manual (Page 63)

3.10 Changing From Alternate Paper Path .To Main Paper Path
If paper is loaded in the alternate printer path, you may change to the main paper path by
proceeding as follows:
1. Press the On/Off Line key to take printer off line.
2. Press the Tear Off key to advance form to tear off point. Remove last printed
form.
3. Press the Park key. The continuous forms will be backed down out of the paper
path and held in the tractors. The display will appear as shown
4. Press the Path key. The printer will shift to the main paper path and automatically
load paper. If paper is not loaded in the main path, the display will indicate so.
5. If paper is loaded, press On/Off Line key.
3-22
3.11 Paper Out Condition
< Paper Out Alt >
< Paper Out Main >
NOTE
To use the Path key, the `Path' feature
setting must be set to `Either' in the
current selected Profile. If the `Path'
feature is set to `Main' or `Alt', the Path
key is disabled. See Sections 3.13 - 3.14
for a description of paper path changing
using Profiles.