AMT Datasouth Documax A6300 - Manual (Page 61)

(For cut sheet models, just insert the form. The following steps will be automatically
executed by the printer.)
1. Press the On/Off Line key to take printer off line.
2. Press the Tear Off key to advance the form to the tear off point.
3. Remove the last printed form.
4. Press the Park key. The continuous forms will be backed down out of the paper
path and held in the forms tractors. The display will appear as shown.
5. Press the Path key. The printer will shift to the alternate path then attempt to load
paper.
6. If paper is not loaded in the alternate path, the display will indicate so.
7. If paper is loaded, press On/Off Line key.
< Paper Out Main >
Load Profile x
< Paper Out Alt >
Load Profile x
NOTE
To use the Path key, the `Path' feature
setting must be set to `Either' in the
current selected Profile. If the `Path'
feature is set to `Main' or `Alt', the Path
key is disabled. See Sections 3.13 - 3.14
for a description of paper path changing
using Profiles.
3-20