AMT Datasouth Documax A6300 - Manual (Page 37)

2.3.................................. On/Off Line Key Functions
On/Off Line key functions are the functions printed on the Keypad Door encircling the
keypad. Primary key functions are used for normal operation. Setup Mode functions are
active when the Keypad Door is raised and are explained in Chapter 4.
Figure 2-3. Primary Keys
On/Off
Line Press this key to switch the printer between on line and off line status.
This key is used in conjunction with the LCD display. The On/Off Line
key is also used to continue after clearing an error condition or to
acknowledge tearing off a form on a paper path change.
Load/
Form Feed If the display indicates a paper out, press this key to load paper into the
main or alternate feed paths.
When continuous forms are loaded, press this key to advance the paper
to the top of the next form.
Park/Path When paper is loaded, press the Park/Path key to `park' paper into the
tractors.
When paper is not loaded, press the Park/Path key to change the paper
path and attempt to load paper (on dual path units). Either Main or
Alternate paper path can be selected using this key.
The Path key is only valid if the Path feature is set to "Either". Paper
paths can also be selected by setting the path feature in a profile and
selecting that profile. For additional instructions, see 3.8 - 3.13.
2-3