AMT Datasouth Documax A6300 - Manual (Page 81)

MENU 2: FORMS CONTROL
Printer Displays Values Description
Load
###/144"
0 0/144
.
.
.
.
.
.
Current
Form
Length In
Inches
This feature is used to align the first printline of a form
and the printhead. This feature is normally set using
the Adjust Form key. This feature is active only
during paper loading.
Increments are in inches or 1/144th of an inch.
Load Crg Move xxx On
Off
The printhead carriage moves in conjunction with a paper
load.
The printhead carriage remains out of the paper path during
a paper load. This improves paper handling on certain
(thin) forms.
Horz Adj xxx/144" 0/144
.
.
.
.
144/144
This feature allows the user to logically offset the form
horizontally to the left, up to 1 inch. This feature is
active immediately when set.
Valid Horz Adj values are 0 through 144/144ths of an
inch.
Tear x xxx/144" 0 0/144
.
.
.
11 0/144
This feature determines the distance the paper is moved
when the Tear Off key is pressed.
Increments are in inches or 1/144th of an inch.
Manual Tear xxx FF The printer will perform a form feed before moving to the
tear position after pressing the Tear Off key.
TOF The printer will move to the tear position after printing
past the next forms boundary, when the Tear Off key
is pressed.
No FF This value will move the paper the tear distance only. No
form feeds are performed.
Manual Time ##s OFF The Tear Off key must be pressed to return the forms to
the print position.