AMT Datasouth Documax A6300 - Manual (Page 13)

1.2 Quick Start Up Procedure
The following is an abbreviated installation and start up procedure provided for users who
are already familiar with printer products. If you are not experienced with printers, follow
all of the instructions in Chapter 1 for setting up printer.
1. Place the printer on a suitable stand or countertop.
2. Install ribbon cartridge following the instructions on the box.
3. Attach the power cord.
4. Turn printer on.
5. Position left tractor with Alignment mark on printer. Position front paper guides
and rear paper supports equally across the width of the form. Load 8.5" paper in
tractors.
6. Press the Load key (or insert a cut sheet).
7. Open the Keypad Door to enter Setup Mode.
8. Use the Quick Access key, the Value  keys, and the Enter key to set margins.
9. Close the Keypad Door.
10. Press the Profile key to save settings.
1-2
11. Press the Feature  key to display "Self Test".
12. Press the Enter key.
CAUTION
ENSURE THAT FRONT RUBBER
FEET ARE AT LEAST ONE INCH
FROM THE EDGE OF THE
TABLE.
CAUTION
IMPROPER MARGIN SETTINGS
CAN LEAD TO PRINTHEAD
DAMAGE! DO NOT PRINT OFF
THE EDGE OF THE FORM.