AMT Datasouth Documax A6300 - Manual (Page 33)

1.10 RS-232 And RS-422 Serial Interface ...... Configuration
1. Set the power switch to On.
2. Open the Keypad Door. The first menu will appear on the display.
3. Press the Next Menu key until you have accessed Menu 5
4. Press the Feature  key one time to select Baud Rate Feature.
5. Press the Value  or Value  to change baud rate to match host computer.
6. Press the Enter key to save your selection.
7. Press the Feature  key to select Serial RS-232.
8. Press the Value   keys to select the desired serial mode [RS-232, RS-422,
NONE]. Select NONE to disable the serial port.
9. Press the Enter key to save your selection.
10. Use the Feature , Value  , and Enter keys to change any other required
features in this menu.

Parity

Data Bits

DTR

HANDSHK

X-ON CTRL ROBUST

X-OFF CTRL ROBUST

MODEM CTRL
11. Close the Keypad Door to exit Setup Mode. Display will alternate:
1-22
12. Press the Profile key to permanently save the profile setting.
M1 PAGE FORMAT
M5 SERIAL CNTRL
Press ‘Profile’
To Save Settings