AMT Datasouth Documax A6300 - Manual (Page 118)


Forms Tear Off:
Zero forms tear off

Paper Slew (Paper Advance):
Slew speed is 10 IPS (inches per second) maximum and is programmable. Cut sheet
slew is 10 IPS maximum.
A.5 Forms Mode Change

Parking Forms:
The forms are reverse fed into the tractors, so that the alternate paper path may be
selected. The new forms are then reloaded to the previously set top of form and top
margin.

Tear Off:
A key may be used to advance the forms a predefined distance, so the last printed
form can be removed without wasting the next form. The distance advanced is
programmable by the user. The forms are returned to print position when the key is
pressed again, or after a user specified timeout period.
A.6 Communications Interface

Communications Buffer Size:
12K depending on RAM option installed. Size and handshaking limits are
programmable.
 RS-232/RS-422 Serial Interface Characteristics:
Baud Rates: 110, 300, 600, 1200, 1800, 2400, 4800,
9600,19.2Kb
Protocol Types:
X-ON/X-OFF, ETX/ACK, ENQ/ACK, DTR

Centronics-Compatible Parallel Interface Characteristics:
36 pin Amphenol Configuration
Protocol Types:
BUSY, ACK
A-3
A.7 Operator Panel Functional Description

Display Description:
1 line by 16 character LCD. In addition, an LED is used to indicate READY (On
Line) status.

Key Switch Layout: