AMT Datasouth 41AY89AR777 - Manual (Page 72)

4.3.3 EPSON MODE ESCAPE SEQUENCES
In the escape sequences listed in Table 4.4, nl and are both used as a
variable. When the variable nl is used, the value of nl is represented by the
ASCn character 0-9. When the variable is used, the value of is
represented by the decimal equivalent of an ASCII character and the value of
is sent as a character string. See Paragraph 4.3 for examples. Feature 13
must be set to a value of 6 in order to use the escape sequences listed in
Table 4.4.
Table 4.4 Epson Mode Escape Sequences
ESCAPE SEQUENCE FUNCTION
HORIZONTAL PITCH
ESC $ n1 M Selects pitch and font where n1 is equal to the front
panel value of the pitch and font as defined by
Feature 9
ESC 11w Selects 10 cpi draft
ESC[2 w Selects 12 cpi draft
ESC[4w Selects 16 cpi draft
ESC[5 w Selects 5 cpi draft
ESC[6 w Selects 6 cpi draft
ESC[8 w Selects 8 cpi draft
ESC SO Selects double-wide print
ESC SI Selects condensed print (16 cpi)
DC2 Cancels condensed print
DC4 Cancels double-wide
ESCW Enable doublewide print n=1 or <1>
Cancel doubiewide print n=0 or <0>
ESCE Enable emphasized mode
ESCF Disable emphasized mode
ESCG Enable double strike
ESCH Disable double strike
4-13