AMT Datasouth 41AY89AR777 User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Column 2 contains no dots and therefore colimin 2 has a value of 64 (0 plus
bit 7). This is also true for columns 3,4 and 5. In column 6 aU six print wires are
fired so column 6 has a value of 127 (63 plus bit 7). Columns 7,8,9,10 and 11
also have a value of 127. In column 12 only the top two print wires are fired so
column 12 has a value of 112 (48 plus bit 7). Coliunn 13 has a value of 76 (print
wires 3 and 4 are fired). Column 14 has a value of 67 (print wires 1 and 2 are
fired).
The procedure of determining the value for every column must be performed for
each of the six lines. The value for each column (in parenthesis) in lines 2
through 6 is given below.
NOTE
The values given below include the value of bit 7.
Line 2. Column 1, (127); columns 2 through 5, (64); columns 6 through 11,
(127); columns 12,13 and 14, (64); column 15, (96); column 16, (88); column
17, (76); column 18, (66); column 19, (67); column 20, (65).
Line 3. Column 1, (127); columns 2 through 5, (64); columns 6 through 11,
(127); columns 12 through 15, (64); columns 16 through 21, (127); column 22,
(80); column 23 and 24, (72);
column
25 and 26, (68); column 27 and 28, (66);
column 29 and 30, (65).
Line 4. Column 1, (127); columns 2 through 5, (64); columns 6 through 11,
(127); columns 12 through 15, (64);
columns
16 through 21, (127); column 22
through 25, (64); column 26 through 31, (127); columns 32 and 33, (96);
columns
34 and 35, (80).
Line 5. Column 1, (127); columns 2 through 5, (64); columns 6 through 11,
(127); columns 12 through 15, (64); columns 16 through 21, (127); column 22
through 25, (64); columns 26 through 31, (127).
Line 6. Column 1, (127);
columns
2 through 5, (65); columns 6 through 11,
(127); columns 12 through 15, (65);
columns
16 through 21, (127); column 22
through 25, (65); coliunns 26 throu^ 31, (127); columns 32 through 35, (65).
In order to send the value for each column of graphics and print the figure, the
user must first enter DS-180 graphics mode.
NOTE
Feature Number 49 must be enabled in order to enter
DS-180 graphics. See Paragraph 2.5.2
4-46