3 unpacking and installation, Unpacking and installation -4 – AMT Datasouth 41AY89AR777 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1.3 UNPACKING AND INSTALLATION
Perform the following steps:
1.
Lift the printer from the box and place the printer on the stand or work table
where it will operate.
2.
Remove the following items from the box:
printer
power cord
user documentation
fuse kit
quick reference c^d
front panel
3.
4.
NOTE
Do not discard original packaging materials.
Shipping the printer in any container other than
its original packaging may catrse damage during shipping
and may void the warranty.
Lift thé access cover and remove the shipping restraint from the carriage and
right endplate. (To locate the carriage, see Figure 1.1.)
Manually move the carriage.
Result:
A noticeable degree of resistance occurs due to the motor, but the
carriage should move smoothly without binding.
If the carriage either does not move smoothly
(because it is jammed or due to momentary binding),
or moves with no resistance at all,
then have the cable drive mechanism inspected
by a service technician before operating the printer.
1-4