5 operator maintenance and troubleshooting, 1 introduction, 2 maintenance – AMT Datasouth 41AY89AR777 User Manual
Page 112: 5 operator maintenance and troubleshooting -1, Introduction -1, Maintenance -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5 OPERATOR MAINTENANCE AND
TROUBLESHOOTING
5.1 INTRODUCTION
Before you call for service,
read this section. It contains solutions that can save
you down time and money, ff you do need to contact someone for service, please
have your printer model and serial number available.
This chapter gives helpful maintenance and troubleshooting procedures.
These procedures require no special knowledge of electronics or printers. Any
troubleshooting or maintenance beyond the level presented in this chapter should
be performed by a qualiQed technician.
5.2 MAINTENANCE
WARNING
Disconnect the printer from the AC power supply
before reaching into the printer
to perform any cleaning task.
CAUTION
Do not use any cleaners, solvents, or lubricants on any of
the working parts of the printer.
Clean your printer about every three months. To clean the printer, use a vacuum
cleaner with a plastic nozzle to remove dirt from the carriage, paper guides and
platen. As often as necessary, remove accumulated dirt from the carriage rods
and the platen with a dry, lint-free cloth. Clean the printer cover with a
commercial cleaner such as 409. To clean the access window, use a soft
non-abrasive cloth rather than paper products.
5 - 1