AMT Datasouth 41AY89AR777 - Manual (Page 39)

The printer offers ten resident character sets which can be selected either at the
operator panel or via the conununications line. The default character set is IBM
PC Compatible. The following is a table of the character sets, the front panel
value and the escape sequences to select each.
2.4.11 Feature 15 - NATIONALITY (Secondary Character Set)
Character Set
Front Panel
Value
Escape
Sequence
Escape
Sequence
U.S. ASCII 1 • ESC(B ESC$F15;1.
U.K. ASCII 2 ESC(A ESC$F15;2.
German 3 ESC(K ESC$F15;3.
French 4 ESC(R ESC$F15;4
Swedish/Finnish 5 ESC(C ESC$F15;5
Norwegian/Danish 6 ESC(E ESC$F15;6
Greek 7 ESC(G ESC$F15;7
Spanish 1 8 ESC(D ESC$F15;8
IBM PC Compatible 10 ESC(I ESC$F15;10
Spanish II
(draft print only) 11 ESC(J ESC$F15;11.
The escape sequences listed in the first column above may be used to select the
desired character set only when the secondary character set is “active” (the
character set being printed).
2.4.12 Feature 24 - PAPER FEED SPEED
The amount of torque provided by the paper feed motor may be increased by
feeding the paper at a slower speed. The setting of Feature 24 controls the paper
feed speed and therefore the amount of torque provided by the paper feed motor.
Increased paper feed torque is sometimes needed when heavy forms are used.
Feature 24 may be set to a value of 1 through 14. Setting Feature 24 to a value
of 1 provides maximum torque (slow feed rate), and setting Feature 24 to a value
of 14 provides minimum torque (fastest feed rate).
2-12