6 feature 08 - vertical tabs – AMT Datasouth 41AY89AR777 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Up to 32 horizontal tabs may be set in the printer. When a horizontal tab is
received from the cotmnunications line, the printhead advances to the next
column at which a horizontal tab stop has been set.
To set, clear, or view the tab status, enter setup mode and advance the display to
“07”. Press the Feature Value key, and the display will indicate up to a four-digit
number. The left-most digit will show a “1” if a tab is set, or a “0” if no tab is set.
The right-most three digits indicate the column corresponding to the tab status.
For example, the display will show a value of 1106 if a tab is set in column 106.
A value of 0106 will be seen if no tab is set at column 106. The Display keys are
used to cycle the column number.
2.4.5 Feature 07 - HORIZONTAL TABS
NOTE
The display will always indicate a tab is set at column 1
unless all 32 tabs are set.
2.4.6 Feature 08 - VERTICAL TABS
Up to 32 vertical tabs may be set in the printer. When a vertical tab code is
received from the communications line, the paper advances to the next line at
which a vertical tab stop has been set. To set, clear, or view the tab status, enter
setup mode and advance the display to “08”. Press the Feature Value key, and the
display will indicate up to a four-digit number. The left-most digit will show a
“1” if a tab is set, or a “0” if no tab is set. The right-most three digits indicate the
line corresponding to the tab status. For example, tihe display will show a value
of 1 26 if a tab is set at line 26. A value of 0 26 will be seen if no tab is set at line
26. The Display keys are used to cycle the line number. The display will always
indicate a tab is set at line 1 unless all 32 tabs are set.
2-8