13 downline programming of feature value features – AMT Datasouth 41AY89AR777 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.4.13 DOWNLINE PROGRAMMING OF FEATURE VALUE
FEATURES
The laser may change the value of features 2 through 24 via the communications
line by using an escape sequence. The format of the escape sequence is
ESC$Fnl;n2. where nl is the feature number and n2 is the value. For example,
ESC$F9;12. will set Feature 9 to a value of 12.
NOTE
Baud rate and tabs may not be set with this escape sequence.
2-13
This manual is related to the following products: