3 using the operator panel, Using the operator panel -4 – AMT Datasouth 41AY89AR777 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.3 USING THE OPERATOR PANEL
As mentioned in Paragraph 2.2, the purpose of the operator panel is to allow the
operator to configure all programmable features of the printer. By specifying
these features (such as baud rate, left and right margins, communications
protocol, etc.) the printer can be adapted to best suit the operator’s needs. Once
set, the values are retained in a non-volatüe memory and will not be lost when
power is turned off. When powered on, the printer resumes operation with all
user-programmable features configured as they were when the printer was last
powered off.
The programmable features are divided into two main categories; value features
and discrete features. Value features are those features which require a numeric
value. Discrete features are those features which require only an on/off setting.
Descriptions of all features and examples of how to set both types are given in
the following paragraphs.
2-4