Aiwa SX-NV20 - Manual (Page 54)

SPECIFICATIONS
Frequency range
Usabfe sensitivity (iHF)
Aiternate channei seiectivity
Signai-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
Frequency range
Usabie sensitivity
Seiectivity
Signal-to-noise ratio
Antenna
Program timer
Sieep timer
Power output
Harmonic distortion
input sensitivity
Track format
Frequency response
Tape speed
Recording system
Erasure system
Motor
Heads
87.5 MHz to 108 MHz
1.3 |xV (75 ohms) 13.2 dBf
50 dB (±400 kHz)
STEREO: 70 dB
MONO; 76 dB
0.3 % (MONO), 1 kHz
0.5 % (STEREO, L-R), 1 kHz
30 Hz to 15 kHz (+0.5 dB, - 3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
530 (531 ) kHz to 1710 (1602) kHz
350 nV/m
22 dB (10 kHz)
53 dB (100 dB input)
Loop antenna
On-timer, capable of free setting
Capable of setting in 10-minute
increments, 240 minutes maxi­
mum
FTC RULE
16 watts per channel, Min.
RMS at 6 ohms, from 65 Hz to 15
kHz, with no more than 1 % Total
Harmonic Distortion
0.05 % (10 W, 1 kHz, 6 ohms)
VIDEO/AUX: 400 mV
4 tracks, 2 channels
Normal tape: 50 - 15000 Hz
4.8 cm/sec. (IVs ips)
AC bias
AC erase
DC sen/omotor x 1
Playback head x 1 (deck 2)
Recording/playback X 1 (deck 1)
Erasure head
x 1 (deck 1)
Disc
Scanning method
Laser
Rotation speed
Error correction
No. of channels
D-A converter
Wow/flutter
Signal-to-noise ratio
Harmonic distortion
Compact disc
Non-contact optical scanner (semi­
conductor laser application)
Semiconductor laser {X=780 nm)
Approx. 500 rpm - 200 rpm (CLV)
Cross Interleave, Reed Solomon
code
2 channels
1 bit dual
Unmeasurable
90 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
SPEAKER SYSTEM SX-NV20
(These values are for one speaker.)
Cabinet type
Speaker
Impedance
Music power
Output sound pressure level
Dimensions (W x H x D)
Weight
COMMON SECTION
Power requirements
Power consumption
Dimensions (W x H x D)
Weight
Accessories
3 way, bass reflex (magnetism
sealed type)
130 mm (5Vs in.) cone type woofer
50 mm (2 in.) cone type tweeter
20 mm ('Vi6 in.) ceramic type su­
per tweeter
6 ohms
40 W
87 dB/W/m
200
x 302 X 220 mm
(778 X 12 X 874 in.)
2.8 kg (6.2 lb.)
AC 120 V, 60 Hz
55 W
Main unit:
260
X 305 X 340 mm
(10V4x12Vsx13V2in.)
System:
660 X 305 X 340 mm
(26x1278x1372 in.)
Main unit: 6 kg (13.2 lb.)
System: 11.6 kg (25.52 lb.)
FM feeder antenna
AM loop antenna
Remote control
Specifications and external appearance are subject to change without
notice due to product improvement.
56