Aiwa SX-NV20 - Manual (Page 30)

RADIO RECEPTION
BASIC OPERATION
i 1
<=
2,4 —
1
'X
. .... -
a!
I-o —
CD '
© @ O
m.L 1.1.1-c:
il-2
a-3
□-1
1 Press the TUNER/BAND button to set one of the
bands. -* See illustration E!-1.
■ FM —► AM -
□ □
2 Check whether the manuai tuning mode is se-
iected. See iiiustration Q-2.
In the manual tuning mode, the preset number is not displayed.
(© in the display shows the position of the preset number.)
If the preset number is displayed, press the > PRESET/
TUNING button so that the preset number goes out.
3 Press the ◄◄ DOWN or ►► UP button to seiect a
station. See iiiustration Q-3.
Each time it is pressed, the frequency is changed.
To search for a station quickly (Auto search)
Press the ^ DOWN or ►► UP button for 1 to 2 seconds, and
a station is searched for automatically. After tuning in to a
station, the search stops.
The search may not stop at a station with a very weak signal.
When an FM stereo broadcast is difficult to listen to
Press the FM MODE button on the remote control while pressing
the SHIFT button to extinguish “AUTO” in the display. -► See
illustration [0 • Background noise is reduced though the sound is
monaural.
To restore stereo reception, press it again.
PRESEniNG STATIONS
The unit can store a total of 32 stations. They can be tuned in to' by
selecting their preset numbers. It is possible to store stations of any
band in the order of your choice.
1 Select a band and station.
2 Press the II SET button to display a preset number.
See illustration B-2.
The preset tuning mode is selected.
In the preset tuning mode, the preset number flashes. (® in
the display shows the preset number).
3 Press the ◄◄ DOWN or ►► UP button to select a
preset number, -r See illustration Q-3.
4 Press the II SET button to store the station,
illustration Q-4.
►See
The frequency flashes twice and the preset number ® in the
display flashes once and goes out.
5 Repeat steps 1 to 4 for the next preset.
30