To position each antenna, Note, 3 connect the ac cord – Aiwa SX-NV20 User Manual
Page 10: Connection with outdoor antenna, Connection with a super woofer, Œnnecnons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
œNNECnONS
□
ANTENNA
T
FM
75 n
To position each antenna
FM feeder antenna
Extend this antenna horizontally in a T-shape and fix its ends to
the wall with cellophane tape.
AM loop antenna
T
0 stand the antenna on a surface, fix the claw to the slot. After
standing it, position it to find the best direction and position for
radio reception. See illustration 2-0 .
To fix the antenna to the wall, use screws © (not supplied).
See illustration
2- B
NOTE
• Do not bring the ends of the FM feeder antenna near metal
objects or curtain rails.
• Do not unwind the AM loop antenna wire.
• Do not bring the AM loop antenna near a turntable system, CD
player, TV monitor, or the stereo system itself, or close to the
AC cord or speaker cords, since noise will be picked up.
3 Connect the AC cord.
Connect the AC cord to an AC outlet. When the AC cord is
connected, the clock display flashes.
If setting up with other equipment, connect the AC cord after
setting.
CONNECTION WITH OUTDOOR ANTENNA
For better FM reception, it is recommended that an outdoor
antenna be connected.
Connect the outdoor antenna to the FM 75 Î2 terminals. -> 0
CONNECTION WITH A SUPER WOOFER
Connecting a super woofer increases the realism of low-frequency
sounds.
Connect a super woofer with a built-in amplifier (Aiwa TS-W5 etc.)
to the SUPER WOOFER terminal. -+
0
Refer to the super woofer operating manual for details.
10