General, Ionoanjiij – Generac Power Systems NP-40G User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 1.7- SHEET METAL
General
See ‘Exploded View of Sheet Metal" on next page. A
DIVIDER PLATE (Item 1 )separate8 the AC generator com
ponents from the engine. The engine Itself Is enclosed
by a BASE HOUSING WRAPPER (ftem 4), a FRAME (Item
24), and a BELLY PAN (Item 23). These components are
sealed by means of rubber SEALS (Items 3), to prevent
the escape of gases.
The LOWER FAN attaches to the engine shaft and Is
enclosed In a LOWER FAN HOUSING (Item 19). Air Is
drawn Into the enclosed area around the engine and
forced out of the LOWER FAN HOUSING.
Removal of sheet metal will be necessary for many
repairs and for replacement of most parts.
NP-30/NP-40 Generator
CONTROL PANEL
BOX
DIVIDER PLATE
/
AIR CLEANER
ROCKER COVER
COVER
OIL FILTER buy il
OIL FILL TAG
I
. . . r
ionoanjiiJ
Page 1.7-1