Toa N-8000 Series Ver.1.41 - Manual (Page 91)

2-39
Chapter 2: FUNCTIONS AND OPERATION
4.8. Call- and Talk-Interlocked Contact Output
(only when the N-8050DS/8540DS is used)
The contact output of the N-8050DS Door Station or N-8540DS IP Door Station is closed depending on its
own station's operating status.
The timing that the contact output is closed can be selected from 3 patterns; contact closed during call, during
talk, and during call and talk.
For example, a flasher or camera can be controlled in response to call or talk operation.
Note
Use the N-8000 Software program to perform settings for the Door station contact output.
(Refer to
p. 5-30, 5-49 .)
[Example for controlling a flasher]
N-8050DS/8540DS
Contact output
Flasher
[Door station operation vs. Open/closed status of "Door station contact output"]
Closed during call
Door station contact output
Door station operation
Calling
Call waiting
Talking
Being paged
Receiving scan monitor
Closed during
call and talk Closed
during talk
Closed
Closed
Open
Open
Open
Open
Open
Closed
Open
Closed
Closed
Closed
Closed
Open
Closed