Toa N-8000 Series Ver.1.41 - Manual (Page 44)

One-shot make
output
Make/break
output
Tie-Line Connection
1-31
Chapter 1: GENERAL DESCRIPTION
External equipment can be controlled by momentarily
closing the Multi interface unit's corresponding contact
through operation of the station.
External
Equipment
Control
P. 2-35
P. 5-38
P. 5-42
P. 5-52
P. 5-56
Using the Multi interface unit for tie-line connection
between the N-8000 Series intercom system
exchange and other series intercom system
exchanges via 4-wire private lines permits calls,
conversations, or paging to be mutually made
between stations connected to the tie-lined
exchanges.
P. 2-32 P. 5-40
BGM
Connecting playback components to the Multi
interface unit permits Background music selectable
from up to 8 programs to be heard from each station
speaker while in standby mode.
P. 2-34
P. 5-30
P. 5-40
P. 5-49
External equipment can be controlled by closing or
opening the Multi interface unit's corresponding
contact through operation of the station.
P. 2-35
P. 5-42
P. 5-52
P. 5-56
Calling Station
Indication/CCTV Interlock
Closing the Multi interface unit's contact in
synchronization with calls received enables calling
station indication or CCTV system control.
P. 2-37
P. 5-30
P. 5-49
P. 5-52
P. 5-56
Door Remote Control
Control of such external equipment as electronic locks
can be performed by momentarily closing the Multi
interface unit's corresponding contact through
operation of the station.
Operating the door remote control function at the
station in conversation mode closes the Multi interface
unit's preset contact output terminal for a specified
period of time.
P. 2-38
P. 5-30
P. 5-38
P. 5-49
P. 5-56
Contact Bridge
Closes the Multi interface unit's output contact terminal
when the input contact terminal is closed.
P. 2-41 P. 5-42
Remote Dial Control
When the Multi interface unit's contact input terminal is
closed, the specified station is made to automatically
perform the set dial operation.
P. 2-40 P. 5-42
PBX Connection
Reference page
7.2. Multi Interface Unit's Functions
The addition of the N-8000MI Multi-interface unit makes the following functions available:
External Input Paging
Activating the control input after connecting the
Remote microphone or playback components to the
Multi interface unit enables broadcasting to the
preprogrammed zone(s).
P. 2-26
P. 5-40
P. 5-42
If the Multi interface unit is connected to the PBX's
analog E&M interface, calls or conversations can be
mutually made between the N-8000 system's stations
and the PBX's extension telephones or paging calls
can be initiated from the PBX extension telephone.
P. 2-30 P. 5-40
Operation
Function Description
Setting