Toa N-8000 Series Ver.1.41 - Manual (Page 83)

2-31
Chapter 2: FUNCTIONS AND OPERATION
4.2.2. Being called from a PBX extension telephone
Dialing the intercom access number as well as the N-8000 system's station number at the PBX extension
telephone permits the N-8000 system's station to be called.
The method for receiving a call from the PBX extension telephone at the N-8000 system's station is the same
as when it is called by another station within the system.
Note
Set the intercom access number at the PBX.
Calling tone
Call
Y
Intercom
access No.
N-8000 system's station No.
X X X
4.2.3. Being paged from a PBX extension telephone
Dialing the intercom access number, " ," "8," and the N-8000 system's paging operation number in this order
at the PBX extension telephone permits the paging calls to be made to the N-8000 system's stations.
The method for responding a paging call at the station is the same as when it is paged from the N-8000
system's station. (Note that paging response is valid only while the paging call is in progress.)
Notes
• Paging calls from the PBX extension telephone can be made only when line attribute is set to "PB" using the
supplied N-8000 software. (Refer to p. 5-40 .)
• Set the intercom access number at the PBX.
Y 8 X X
Paging calls
Intercom
access No.
N-8000 system's
paging zone number