Toa N-8000 Series Ver.1.41 User Manual
Page 235
6-21
Chapter 6: SYSTEM SETTINGS USING THE BROWSER
(4) User Data Change button
Pressing this button registers the newly changed user data.
([System Management Utility]
(1) Upload button
Used to write backed-up settings files into the exchange, multi interface unit, or IP station connected to the
PC. (refer to
(2) Browse button
A file selection dialog appears.
(3) Download button
Saves the equipment's settings data (files) to the PC (refer to
(4) Delete All Settings button
Deletes all settings and returns the exchange to its initial factory settings shown below.
IP address:
192.168.1.1
System name: N-8000
Password:
guest
Confirm other settings online using the N-8000 software.
(5) Firmware Update button
Use the latest version of firmware, which is released on the following our web site.
Tips
• Download the latest version of firmware from our site http://www.toa-products.com/international/.
• The current version is displayed above the Firmware Update button.
(6) Clock retrieve button
Pressing this button displays the date and time of the connected PC's clock (refer to
(7) Setting button
Used to set the equipment's clock (refer to
(8) Restart button
Restarts the equipment.
Note
Never restart the equipment while changing settings files or performing a firmware update.