Toa N-8000 Series Ver.1.41 - Manual (Page 89)

2-37
Chapter 2: FUNCTIONS AND OPERATION
4.6. Calling Station Indication/CCTV Interlock (only when the N-8000MI is used)
By installing a lamp type indication board* at the specified station, conversation partners and calling stations
that made calls to the specified station during conversation can be displayed on the board. The indication
board can be shared among multiple stations (up to 8 stations) to indicate which station within the group has
been called. It is also possible to use the N-8000MI's contact for interlocking the N-8000MI with a CCTV
system so that a calling party is displayed on the monitor screen.
* Needs to be separately made to interlock with the multi interface unit's output.
Note
Use the supplied N-8000 software to set the Multi interface unit's contact number and the stations equipped
with the indication board. (Refer to
p. 5-30 , 5-49 , 5-52 , 5-56 .)
Calling in progress
No.201
Station with indication
board No. 239
Station with indication
board No. 239
200
201
202 208
209
210 216
217
218
Conversation in progress
No.201
No.208
Indication board installed
at station No. 239
Indication board installed
at station No. 239
No. 208 in camp-on-busy
2 3 9
2 3 9
200
201
202 208
209
210 216
217
218
N-8000MI
Make contact
N-8000MI
Make contact
Station with CCTV
monitor No. 350
Station No. 301's image
Conversation in progress
No.301
N-8000MI CCTV switcher
Make contact
[Calling station indication example]
• When a station equipped with the
indication board is called, the lamp for
the calling station lights. The lamp
extinguishes when a response is made
to the call and the conversation is
terminated.
• Even if the station equipped with the
indication board is on another line
when it is called, the lamp for the
calling station (i.e. station in camp-on-
busy mode) lights.
• The lamp extinguishes when the
station in camp-on-busy mode stops
waiting.
Note
Operations in this description are based
on the calling station indication mode
being set to "During call and talk."
Perform the setting using the supplied N-
8000 software. (Refer to
p. 5-30 , 5-49 .)
[CCTV interlock example]
• When there is a call to the station with a
CCTV monitor, responding to the call
displays the calling station's place on the
monitor.
Note
Operations in this description are based on
the calling station indication mode being set
to "During talk." Perform the setting using
the supplied N-8000 software.
(Refer to
p. 5-30 , 5-49 .)