Toa N-8000 Series Ver.1.41 - Manual (Page 63)

2-11
Chapter 2: FUNCTIONS AND OPERATION
2.5. Hold
2.5.1. Mic off
Disabling the microphone during a conversation places the line on hold.
[Mic off]
Hold down any key of [0] through [9] continuously
during a conversation.
[Mic off release]
If the key hold down is released, the original
conversation is restored.
2.5.2. Call hold
Conversation during a conversation can be placed on
hold.
[Hold]
Pressing the Hold key during a conversation placed
the conversation on hold, transmitting a hold tone to
both parties.
If the handset is replaced with the key held down, the
conversation is not terminated.
[Hold release]
If the Hold key is pressed again, the hold mode is
cancelled, and the original conversation is restored.
If the call is on hold with the handset on hook, only
lifting the handset cancels the hold mode.
Release the key hold down.
Conversation
Mic off
Receiving call
0
0
Conversation
Holding tone
Holding tone
Hold
[Example]