Toa N-8000 Series Ver.1.41 - Manual (Page 163)

5-19
Chapter 5: SYSTEM SETTINGS BY SOFTWARE Chapter 5: SYSTEM SETTINGS BY SOFTWARE
General: Equipment Registration
[Screen description]
(1) Type (Can't be edited.)
Indicates the type of equipment entered in Step 1.
(2) Equipment No.
Used to enter the equipment number of the exchange. Default values are assigned in numerical
order starting with 1.
(3) Equipment name
Allows a name up to eight alphanumeric characters to be entered for the equipment.
(4) Model
Allows the model to be selected. Setting contents change depending on the model selected.
Note
Selecting the type "EX" indicates model "N-8000EX," selecting "IP" indicates "N-8500MS," and
selecting "MI" indicates "N-8000MI."
To select other equipment, model number needs to be selected. Click a cell to select model.
If an incorrect model number is selected on this screen, operations such as station calls or paging
via other exchange may not be performed correctly.
(5) IP Address
Allows an IP address for the equipment to be entered.
(6) Web Port
Allows the Web server's port number to be entered.
(7) WAN IP address
Allows the IP address for the equipment as viewed from the wide-area network (WAN) to be
entered. This space may be left blank if NAPT is not used.
(8) WAN Web port
Allows the Web server's port number for the equipment as viewed from the wide-area network
(WAN) to be entered. This space may be left blank if NAPT is not used.
Step 2. Set the system configuration.
Enter the number of Exchanges, Multi interface units, and IP stations.
The total number is displayed in the "Total number of equipment connected to Network" space, and a
list of equipment (exchanges, multi interface units, and IP stations) is displayed.