Toa N-8000 Series Ver.1.41 - Manual (Page 213)

5-69
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
Step 5. Press "OK".
Note
The status indicator located on the exchange, multi interface unit, or IP station remains lit during the
update process. Do not restart the system or turn off the power while this light is on.
7.2. Changing the Station Maintenance Password
Step 1. Click "Password Change" on the initial screen to display "Password change" dialog.
Step 2. Click "Station maintenance password" tab to display the Station maintenance password screen.
Step 3. Enter the old password in the [Old password] entry box.
Factory-preset: 0000
Step 4. Enter a new password (four-digit number) in the [New password] entry box.
Step 5. Enter the changed password entered in Step 4 in the [New password (reentry)] entry box for
confirmation.
Step 6. Press "OK".
Note
The status indicator located on the exchange or IP station remains lit during the update process. Do
not restart the system or turn off the power while this light is on.