Toa N-8000 Series Ver.1.41 User Manual
Packet intercom system n-8000 series
OPERATING INSTRUCTIONS
PACKET INTERCOM SYSTEM
N-8000 SERIES
Thank you for purchasing TOA's Packet Intercom system.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Note
This manual does not support the N-8000 system products released in and after October 2009 nor
describe the functions and specifications added or changed since then.
Table of contents
Document Outline
- SAFETY PRECAUTIONS (For N-8000EX/8010EX/8000MI)
- OPERATING INSTRUCTIONS CONFIGURATION
- Chapter 1: GENERAL DESCRIPTION
- 1. GENERAL DESCRIPTION
- 2. FEATURES
- 3. HANDLING PRECAUTIONS
- 4. SPECIFICATIONS
- 5. SYSTEM CONFIGURATION
- 6. NOMENCLATURE AND FUNCTIONS
- 6.1. N-8000EX IP Intercom Exchange
- 6.2. N-8010EX IP Intercom Exchange
- 6.3. N-8000MI Multi Interface Unit
- 6.4. N-8500MS IP Multifunctional Master Station
- 6.5. N-8540DS IP Door Station
- 6.6. N-8000MS Multifunctional Master Station
- 6.7. N-8010MS Standard Master Station
- 6.8. N-8011MS Standard Hands-free Master Station
- 6.9. N-8020MS Industrial-Use Master Station
- 6.10. N-8031MS Flush-Mount Master Station
- 6.11. N-8050DS Door Station
- 7. SYSTEM FUNCTION TABLE
- 8. PAGING FUNCTION OUTLINES
- 9. MULTI INTERFACE FUNCTION OUTLINES
- Chapter 2: FUNCTIONS AND OPERATION
- 1. BASIC USAGE
- 2. CONVERSATION FUNCTIONS AND OPERATION
- 3. PAGING FUNCTION AND OPERATION
- 4. OTHER FUNCTIONS AND OPERATION
- 4.1. Scan Monitor
- 4.2. PBX Connection (only when the N-8000MI is used)
- 4.3. Tie-Line Connection (only when the N-8000MI is used)
- 4.4. BGM (only when the N-8000MI is used)
- 4.5. External Equipment Control (only when the N-8000MI is used)
- 4.6. Calling Station Indication/CCTV Interlock (only when the N-8000MI is used)
- 4.7. Door Remote Control (only when the N-8050DS/8540DS/8000MI is used)
- 4.8. Call- and Talk-Interlocked Contact Output (only when the N-8050DS/8540DS is used)
- 4.9. Remote Dial Control (only when the N-8000MI is used)
- 4.10. Contact Bridge (only when the N-8000MI is used)
- 4.11. Paging Busy Input (only when the N-8000MI is used)
- 5. MASTER STATION OPERATION TABLE
- 6. MULTIFUNCTIONAL MASTER STATION'S LCD DISPLAY TABLE
- Chapter 3: INSTALLATION & WIRING
- 1. INSTALLATION OF THE EXCHANGE
- 2. INSTALLATION OF THE MULTI INTERFACE UNIT
- 3. INSTALLATION OF STATIONS
- 4. WIRING
- Chapter 4: BEFORE PERFORMING SYSTEM SETTINGS⋯
- Chapter 5: SYSTEM SETTINGS BY SOFTWARE
- 1. N-8000 SOFTWARE GENERAL DESCRIPTION
- 2. INSTALLING SOFTWARE
- 3. ACTIVATING N-8000 SOFTWARE PROGRAM
- 4. UNIT SCAN (NETWORK SETTINGS)
- 5. SYSTEM SETTING FUNCTION
- 6. WHEN SETTINGS ARE COMPLETED
- 7. CHANGING THE PASSWORD
- 8. SYSTEM CLOCK SETTINGS
- Chapter 6: SYSTEM SETTINGS USING THE BROWSER
- Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS ONLY)
- Chapter 8: APPENDIX
- 1. BASIC KNOWLEDGE ABOUT NETWORKS
- 1.1. IP Networks and Address
- 1.2. Network Address Port Translation (NAPT, IP Masquerade) and N-8000 Software Program
- 1.3. Unicast vs. Multicast Communications
- 1.4. Network Paging Restrictions
- 1.5. Unit Scan and Broadcast Communications Domains
- 1.6. Sampling Frequency Correction (N-8000EX/8010EX/8000MI only)
- 2. IF TROUBLE OCCURS:
- 3. INDICATOR STATUS & TROUBLESHOOTING
- 4. SPECIFICATIONS
- 4.1. N-8000EX IP Intercom Exchange
- 4.2. N-8010EX IP Intercom Exchange
- 4.3. N-8000MI Multi Interface Unit
- 4.4. N-8500MS IP Multifunctional Master Station
- 4.5. N-8540DS IP Door Station
- 4.6. N-8000MS Multifunctional Master Station
- 4.7. N-8010MS Standard Master Station
- 4.8. N-8011MS Standard Hands-Free Master Station
- 4.9. N-8020MS Industrial-Use Master Station
- 4.10. N-8031MS Flush-Mount Master Station
- 4.11. N-8050DS Door Station
- 4.12. YC-280 Wall Mounting Bracket
- 4.13. YC-290 Wall Mounting Bracket
- 4.14. YC-241 Back Box
- 4.15. YC-251 Wall-Mount Box
- 4.16. YC-150 Back Box
- 4.17. YS-13A Wall-Mount Box
- 4.18. E-7000TB Terminal Board
- 4.19. RS-191 Option Handset
- 4.20. AD-1210P AC Adapter
- 1. BASIC KNOWLEDGE ABOUT NETWORKS